Details: Position 1--Conducts chemical and physical laboratory tests of solid materials, liquids, and gases, and analyzes test data for variety of purposes, such as research, product development, quality control, criminal investigation, and establishing standards, involving experimental, theoretical, or practical application of chemistry and related sciences: Sets up laboratory equipment and instrumentation required for tests, research, or process control. Tests and analyzes products to determine strength, stability, purity, chemical content, and other characteristics. Documents results of tests and analyses.Pay rate is at $11/hour
Showing posts with label Technician. Show all posts
Showing posts with label Technician. Show all posts
Monday, 30 July 2012
Friday, 20 July 2012
Quality Maintenance Technician II - Omaha, Nebraska
Details: Job SummaryThe Quality Maintenance Technician II (QMTII) will provide unit level support for maintenanceand safety standards, to include the performance of Preventative Maintenance Checks (PMs), and review of in-store maintenance procedures as assigned, in Full Line Stores (FLS), KMart and off-mall stores. The QMTII assists their store in maintaining the standards and disciplines needed to provide a high level of customer satisfaction and impact energy usage. The candidate for this position will also provide training to support the activities of the Quality Maintenance Technician Level I (QMTI). The person seeking this position should be a self-starter, be proficient in completing tasks in the required time frame and have a strong mechanical aptitude. Daily travel is required. Occasional overnight stays are required in remote areas of the country and as emergency situations require. This position reports to the District Facilities Manager (DFM).Responsibilities•?Maintains HVAC and plumbing needs – roof top units (RTU s), chillers, restroom•?Maintains electrical and Communication systems- ballasts, Ethernet•?Maintains material handling equipment - Baler, compactors etc.•?Maintains interior and exterior of the building•?Performs Preventative Maintenance checks requiring technical knowledge•?Provide training to support the activities of the QMT1•?Perform administrative duties utilizing the Sears Maintenance and Repair Ticket (SMART)system•?Perform miscellaneous duties as assigned by the District Facilities Manager (DFM)
Wednesday, 18 July 2012
NDT Technician
Details: Job Classification: Contract Non Destructive Testing Technicians needed for Aviation repair companyJob Duties:1. Perform magnetic particle and/or penetrant inspections, specific calibrations, product interpretations and evaluations.2. Follow procedures in the techniques and methods in accordance with specifications.3. Receive necessary instruction and supervision from Level II or Level III inspection.4. Assist Cleaner/Etcher as needed to prepare parts and works directly with Quality Assurance department as needed.Must have:High School diploma or equivalentLevel I certification (preferred)Pay Rate: $12-16 - based on experienceShifts: 1st and 2ndMust pass drug and background checksJoin Aerotek Aviation®LLC. We specialize in placing mechanics, technicians, engineering field support and specialized personnel in the aviation industry. Our rapid growth means we are constantly seeking employees nationwide. We offer comprehensive benefits to include medical, dental, optical, and optional 401k. Don't put your career in the hands of just anyone, put it in the hands of a specialist. Join the Aerotek Aviation team! Allegis Group and its subsidiaries are equal opportunity employers and will consider all applications without regard to race, marital status, sex, age, color, religion, national origin, veteran status, disability or any other characteristic protected by law.
Quality Maintenance Technician II - Mentor, OH
Details: Job SummaryThe Quality Maintenance Technician II (QMTII) will provide unit level support for maintenanceand safety standards, to include the performance of Preventative Maintenance Checks (PMs), and review of in-store maintenance procedures as assigned, in Full Line Stores (FLS), KMart and off-mall stores. The QMTII assists their store in maintaining the standards and disciplines needed to provide a high level of customer satisfaction and impact energy usage. The candidate for this position will also provide training to support the activities of the Quality Maintenance Technician Level I (QMTI). The person seeking this position should be a self-starter, be proficient in completing tasks in the required time frame and have a strong mechanical aptitude. Daily travel is required. Occasional overnight stays are required in remote areas of the country and as emergency situations require. This position reports to the District Facilities Manager (DFM).Responsibilities•?Maintains HVAC and plumbing needs – roof top units (RTU s), chillers, restroom•?Maintains electrical and Communication systems- ballasts, Ethernet•?Maintains material handling equipment - Baler, compactors etc.•?Maintains interior and exterior of the building•?Performs Preventative Maintenance checks requiring technical knowledge•?Provide training to support the activities of the QMT1•?Perform administrative duties utilizing the Sears Maintenance and Repair Ticket (SMART)system•?Perform miscellaneous duties as assigned by the District Facilities Manager (DFM)
Sunday, 15 July 2012
Quality Technician
Details: Kelly Services is currently seeking qualified candidates for a Quality Technician opportunity in Gwinner, ND. This is a temporary position that is expected to last approximately four months or longer. Pay is $12+/hr DOE. The Quality Technician is responsible for checking for quality of manufactured equipment to ensure certain criteria are met. Ideal candidates will possess the following: Ability to operate skid steers and excavators Ability to communicate well with a variety of team members Strong team player attitude Previous manufacturing experience preferred Quality control experience highly desired If you are interested in this great opportunity, please apply online at www.kellyservices.com, email your resume to , or call us at 1-800-959-4611. Kelly Services, Inc. is a Fortune 500 company. We offer employment to more than 750,000 employees each year, with skills ranging from office services to light industrial. Come to work for Kelly, the first and the best in the staffing industry.
Quality Technician / Mechanical Inspector
Details: Quality Technician JEM Technical High Performance Hydraulic, Electro-Hydraulic, and Pneumatic Valves Our CompanyJEM Technical was founded in 1984 as a manufacturers’ representative, marketing fluid power products in the Upper Midwest, with an emphasis on hydraulic valves. Today, JEM Technical is a manufacturer of integrated value solutions with complete control of the process from beginning to end. JEM Technical’s flagship product line is HydraForce™, the market leader of cartridge valve technology. JEM Technical is committed to advancing OEM and end-users with theirFluid Power and Controls applications.Our OpportunityTo effectively provide a high level of service to the customer by providing timely our manufacturing and assembly departments in assuring quality product and processes. Areas of accountability include: Perform First Article Inspection (ISIR) and customer required approval processes (PPAP). Assist manufacturing and assembly in performing In-Process and Final Inspection duties. Perform Level II (Receiving Inspection) duties. Assist in developing and maintaining Control Plans and Receiving Inspection Check Sheets. Assist in the management and maintenance of Gages and Inspection Equipment under gage control. Assist in the analysis and disposition of product in Material Review Board (MRB). Provide necessary support to other departments in problem or quality resolution. ?Our Qualifications Q.E. Technician degree or equivalent Proven ability to manage multiple tasks and objectives to completion Effective communication skills Proven knowledge and understanding of various gages, inspection equipment and inspection techniques Prior use and knowledge of various software applications including Microsoft Office, and the ability to learn a new operating system. The ideal candidate will know how to use Blue Print Reading and GD&T. Share with us your talent, drive and entrepreneurial spirit and we will provide a creative and supportive environment, where your valuable contributions are rewarded and celebrated with professional growth, job satisfaction, and an attractive total compensation program. Join us and become part of our great team!We are excited to partner with the HR Professionals at Instigate, Inc. to manage our recruitment efforts for this opening. All responses will be processed promptly on behalf of our hiring team by Instigate's TalentAssist - Recruitment Process Management Services. Please submit your resumes, applications or questions directly to Instigate for consideration. Thank you for your interest in joining our team.KEYWORDS Quality, Technician, Quality Assurance, Surface, Plates,Technical, Machined, CMM, Production, Custom Design, Problems, Solutions, Manufacturing, Industrial, Automation, Pneumatic, Motion, ISO 9000, Problem Solving Control System.
Saturday, 14 July 2012
Electronic Test Technician
Details: * Support of NPI installation, setup, debug and equipment readiness for mass production* Support of NPI installation, setup, debug and equipment readiness for mass production* Responsible of preventive maintenance plan of all test equipment.* Continuous improvement of the test equipment to reach false failureres target, MTTR & MTBF.* Support test process for products in order to assure that the product meets applicable specifications. * Support for determining the best way a test can be performed in order to achieve 100% test coverage of all components using different test process, according with product design and functions* Support Test and Maintenance for the process like:* In-circuit test (ICT)* Stand-alone JTAG test* Automated Optical Inspection (AOI) Test* (Board) functional test (BFT/FT)* Final quality audit process (FQA) test* Diagnostics electronic and electrical to solve failures* analyze and solve quality problems at Manufacturing Cells* Provide accurate drawing and product documentation (Visual Aids,Wiring Diagrams (+DA's') special assembly and inspection Instructions) and specifications (CTQs, CTPs, criteria acceptance and rejection) along with accurate BOM’s* Support FF KPI'S * Support Product / Quality Engineer to identify the source of the product quality defects to solve the problems* Responsible of preventive maintenance plan of all test equipment.* Continuous improvement of the test equipment to reach false failureres target, MTTR & MTBF.* Support test process for products in order to assure that the product meets applicable specifications. * Support for determining the best way a test can be performed in order to achieve 100% test coverage of all components using different test process, according with product design and functions* Support Test and Maintenance for the process like:* In-circuit test (ICT)* Stand-alone JTAG test* Automated Optical Inspection (AOI) Test* (Board) functional test (BFT/FT)* Final quality audit process (FQA) test* Diagnostics electronic and electrical to solve failures* analyze and solve quality problems at Manufacturing Cells* Provide accurate drawing and product documentation (Visual Aids,Wiring Diagrams (+DA's') special assembly and inspection Instructions) and specifications (CTQs, CTPs, criteria acceptance and rejection) along with accurate BOM’s* Support FF KPI'S * Support Product / Quality Engineer to identify the source of the product quality defects to solve the problems
Wednesday, 11 July 2012
LAB TECHNICIAN Person needed for quality control lab of a lime
Details: LAB TECHNICIAN Person needed for quality control lab of a lime and chemical plant. Background in chemistry with previous lab experience required. Duties include in plant product sample collection, sample preparation, quality testing and analysis and first aid. Must be able to work all shifts and week-ends. Associate degree preferred. Excellent computer skills a must. Salary commensurate with ability and experience. Benefit package available. Send resumes to: K. S. Emch Martin Marietta 755 Lime Road Woodville, OH 43469 EEO Source - Newspaper Network of Central Ohio
QUALITY TECHNICIAN
Details: LOOKING FOR A 1ST SHIFT QUALITY TECHNICIAN FOR AN INDUSTRIAL FACILITY.INSPECT AND AUDIT PRODUCT AT VARIOUS STAGES OF PRODUCTION TO ENSURE THE PRODUCT MEETS COMFORMANCE REQUIREMENTS.IDENTIFY ROOT CAUSE OF PROBLEM AND INITIATE THE PREVENTATIVE AND CORRECTIVE ACTIONS. WILL ASSIST IN THE DEVELOPMENT AND IMPLEMENTATION OF IN HOUSE PROCESS INSPECTIONS AND PERFORM QMS AUDITS.
Wednesday, 4 July 2012
QA QC Technician / Inspector
Details: Interest Category: Health & Safety / Homeland SecurityJob Description: Washington Demilitarization Company, LLC, a wholly owned subsidiary of URS Corporation is currently seeking a QA QC Technician / Inspector to be based in our Anniston, Al office.MAJOR RESPONSIBILITIES / DUTIES / TASKS•Perform all work safely and with the utmost concern for the safety of self and other employees.•Perform all work in compliance with environmental permits and regulations.•May be required to work overtime or varying hours.•Work in close proximity to and/or in a chemical demilitarization facility.•Be at work when scheduled and maintain a good attendance record.•Performance of all Quality Control functions at ANCDF.•Development of inspection and test methods and procedures.•Identification and documentation of nonconforming conditions in addition to follow-up verfication of correction actions.•Perform duties and assignments in a safe and cost effective manner.•Review and acceptance of test and inspection results for compliance to acceptance criteria based on ANCDF Engineering Specifications.•Perform QC Inspections and acceptance in accordance with ASNT-TC-1a Standards for testing and certified Welding Inspections iaw American Welding Society Code•Review Project Procedures and assess compliance with regulatory commitments.•Development of surveillance reports.•Interface with project operations personnel on Quality interpretations.•Develop Condition Reports to ensure corrective actions are identified and corrected•Perform receiving inspection of Chemical muntions•Track, trend and report quality data.•Review Work Orders for identification of Quality inspection requirements•Review interim changes in the absence of Quality Management on shift We invite you to take the next step towardTHE BEST WORK OF YOUR LIFE.
X-Ray Technician RT Inspector
Details: Doncasters Precision Castings-New England, a leading Investment Castings Manufacturer located in Groton, Connecticut is currently hiring for: X-Ray Technician RT Inspector / Level IIDivision: Aerospace DivisionDepartment: NDTGroup company: DPC-New EnglandLocation: USA Groton, CT.Hours: Hourly Position Further informationPrinciple Responsibilities, including, but not limited to:• Radiographic inspection of Investment Castings• Review x-ray film for acceptance to inspection criteria• Develop x-ray techniques for complex casting geometries• Assist in training and RT Level I as required• Assist in auditing x-ray process to ensure compliance to NADCAP and AS9100• Should hold NAS 410 Level II certification on RT orhave the ability and requirements to become certified as Level II. • Works under general supervision performing inspection functions on castings following established nondestructive testing inspection methods.• Interprets castings processed through the process and certifies the conformance of the castings to customer’s requirements.• Attends training sessions as required.• Follows all established housekeeping and safety practices.• Maintains related charts, records, reports and sketches. • Requires ability to pass visual acuity test. • Perform any other duties assigned by Supervisor or Level III, or member of management.
Quality Technician - Team Lead
Details: PRIMARY DUTIES/RESPONSIBILITIES:This position will be a full time lead auditor/inspector for all ship-in machines and machines manufactured in the Springdale facility, along with supervising the audit activity. This position will be responsible to create and maintain the requested log sheets, inspection sheets and audit criteria. This position will be responsible for ensuring that all machines are audited according to the specifications and frequency provided and removing any issues within the system through continuous improvement. This position will be responsible for supervising the other Quality Technicians within the machine audit process and managing the work load in cases of absenteeism, increased shipment receipts, etc. The Lead Auditor will have the responsibility of verifying that the machines meet an acceptable level based on the criteria provided by the Quality Department and provide feedback to document the progression of this activity within the database for verifying that the machines meet an acceptable level based on a checklist or criteria that will be provided by the Quality Department, and provide feedback to document the progression of this activity within the database as specified by the department. This position will also be responsible to communicate Quality issues to the Quality Department and supplier and assist in rectifying the Quality issues. This position will also assist with maintaining this activity along with continuous improvement.
Quality Technician
Details: This position will be a full time auditor/inspector for all ship-in machines and machines manufactured in the Springdale facility. This position will be responsible for verifying that the machines meet an acceptable level based on a checklist or criteria that will be provided by the Quality Department. The expectation will be for this position to fully complete the check/audit sheet with requested information and will be required to input data into a database as specified by the department. This position will also be responsible to communicate Quality issues to the Quality Department and supplier and assist in rectifying the Quality issues. This position will also assist with maintaining this activity along with continuous improvement.
Subscribe to:
Posts (Atom)